SR310 SATA III RAID Card

entry-level disk array

Supports RAID 0/1, SPAN

Product Features

Asmedia Chipset

SATA 2 Port

PCI-e 2.0 x2

Supports

Made in Taiwan

Product Introduction

Product QA

File Download

Product Specifications

Uses Asmedia Chipset
PCI-e 2.0 x2 Interface
Supports Serial-ATA (SATA) Gen III 6Gb/s hard drives, backward compatible with SATA I/II
Compliant with Serial ATA Revision 3.2 standards
Provides 2 standard Serial ATA 7-Pin connectors
Supports RAID 0, RAID 1, and SPAN array modes
Supports standard SATA expansion mode, allowing connection of hard drives, SSDs, optical drives, etc., to expand SATA devices
Supports ATA/ATAPI/TRIM commands
Supports Native Command Queue (NCQ)
Includes Low Profile bracket
Compliant with RoHS standards
Made in Taiwan, quality guaranteed

※ RAID mode is only supported on motherboards in Legacy mode and is not compatible with UEFI mode.

Product Application

BIOS screen to configure array mode

Press Ctrl+R during boot to enter

System Requirements

One available PCIe x2 or higher slot
Operating System:

Windows 7, 8.1, 10, 11 / Server 2008, 2008R2, 2012R2

LINUX

Product List

SR310 x1

Low Profile bracket x1

Chinese quick installation guide x1

Product warranty card x1

※The product specifications and accessories mentioned in the user manual are for reference only. Any changes will not be notified in advance. UPMOST reserves the right to modify product design, accessories, and drivers.

Q&A

When creating RAID using the SR310, the message "[Not supported for Software Mode Change]" appears. How can this be resolved?

Set the J1 jumper on the SR310 to the [ON] position.

Unable to boot and key in Ctrl+R to enter RAID BIOS?

Remove the OS system disk, create the RAID, and then reinstall the original system disk after the RAID setup is complete.

Disable the fast boot option in the motherboard BIOS.

Use software to create the RAID.

※ Please ensure the card driver is fully installed in the Device Manager.

If a RAID 1 array is already set up and one of the hard drives fails in the future, how can the failed drive be replaced with a new one and rebuilt?

After shutting down the computer, remove the failed hard drive and replace it with a hard drive of the same specifications. Then, use the SR310 disk management software to initiate the rebuild process.

If you want to install two SR310 cards simultaneously, one as a system disk and the other as a data disk, can they be configured separately? What should be noted?

They can be configured separately. The key point to note is that when operating with multiple cards, it is crucial to clearly document which card is the system disk and which is the data disk to avoid errors during subsequent operations that may lead to data loss.

Why is it not working in UEFI mode?

The SR310 and SR310 Lite versions only support Legacy.

※Legacy BIOS on board supports OS booting for Windows and Linux.

File Download

Date

Type

Operating System

Description

File Download

2021.04.14

Manual

Details

17.0MB

PDF

2021.04.14

Product Catalog

Details

0.3MB

PDF

2022.09.23

Application

Details

Win Server 2008 R2 64-bit

Win Server 2008 32-bit

Win Server 2008 64-bit

Win Server 2012 32-bit

Win Server 2012 64-bit

Win 7 32-bit

Win 7 64-bit

Win 8 32-bit

Win 8 64-bit

Win 8.1 32-bit

Win 8.1 64-bit

Win 10 64-bit

2.2MB

ZIP

RaidManagerTool_v3.130

v3.130

1. Purpose of Data Collection

The purpose of collecting user personal data by "UPMOST" is for customer management, membership management and marketing, information communication management, e-commerce, internal statistical surveys and analysis, and to collect, process, and use personal data as required by legal obligations. This data collection is carried out through methods such as event registration forms, "Contact Us" forms, or order forms.
2. Types of Personal Data Collected

The types of personal data collected on the "UPMOST" website include C001 Identifiers, C011 Personal Descriptions, and C003 Identifiers in Government Data.
3. Tracking Data and Cookie

The UPMOST website management system will record your IP address, browser type, webpage browsing time, and other tracking data. This data will be stored in accordance with the Personal Data Protection Act.
The purpose of collecting and analyzing user data on the UPMOST website is to understand users' browsing needs and analyze web traffic, which serves as a reference for improving content and system operations. To achieve this and provide users with a more user-friendly service, UPMOST will use cookies to automatically record the pages visited by users and the domain name they are located in. A cookie is a small piece of data sent from a web server to the browser and stored on the computer's hard drive.
Generally, cookies are used to:
1. Estimate the total number of visitors and analyze web traffic; this aggregated and processed traffic data will be provided to online advertisers as a basis for evaluating the effectiveness of advertisements.
2. Track your progress and frequency when participating in promotions, giveaways, and contests. When UPMOST organizes promotional activities using cookies, the data written into the cookies will be used to indicate the participant's progress throughout the entire promotion process and can be used to track participation, submissions, and other related actions in lottery activities.
3. Measure browsing patterns, such as the pages visited on the UPMOST website and the accumulated traffic. UPMOST uses this data to understand user habits and preferences, in order to provide more up-to-date information (including advertisements and promotions) and offer more user-friendly services.
4. Users can configure their browser settings to be notified when a cookie is set or to reject the setting of cookies.
4. How does UPMOST use my data?

1. The primary purpose of UPMOST collecting personal data is for reference use in activities, including information services, newsletter services, personalized services, consumer discount services, interactive communication, and many other types of services. Personal data will be retained during the operation of the UPMOST website. By understanding the users, UPMOST will provide better content and more user-friendly services.
2. The personal data provided by users will be used by UPMOST to periodically or occasionally send activity and information service updates through email, phone, and other media. Users have the right to decide whether they wish to participate in the activities offered by UPMOST. If users do not wish for their data to be used, they can email service@upmost.com.tw, and UPMOST will stop sending related information as per the user's request.
3. When you participate in promotions, giveaways, lotteries, or contests organized by UPMOST independently or in partnership with others, please ensure that the information you provide is correct, as inaccurate information may affect your eligibility to participate or claim prizes. The data collected during these activities will be protected in accordance with applicable laws and this statement.
5. Whom does UPMOST collaborate with to collect user data?

When users enter personal data on the UPMOST website, except in the cases listed below or unless UPMOST makes a special statement, the user's personal data will only be used within the UPMOST website. Additionally, if the data is collected or maintained by a third party through a link on the UPMOST website, UPMOST will obtain the user's consent prior to the collection or transmission of the data.
Some promotional activities on the UPMOST website may be organized by third-party entities other than UPMOST, or co-organized by UPMOST and third parties. In such cases, some or all of the data collected during these activities may be shared with partners, allowing them to provide the services that users need in real-time. If users do not wish for their data to be shared, they can choose not to participate in the service or promotional activity.
6. The rights and methods that users can exercise regarding the personal data they provide to the company are as follows:

(1) Request to inquire or access.
(2) Request a copy of the data.
(3) Request to supplement or correct.
(4) Request to stop the collection, processing, or use of data.
(5) Request to delete.
Users can process this through the member information area on the UPMOST website or send an email to service@upmost.com.tw.
7. How does UPMOST protect my personal data?

1. UPMOST is committed to protecting the privacy and security of users' personal data. UPMOST will only provide users' personal data to business partners and sponsors with the user's "consent."
2. If a user's data is to be shared with a third party, UPMOST will notify the user before the data is used. If the user does not wish for their data to be shared, they can choose not to use specific services or not participate in certain promotional activities or contests.
8. Changes to the contents of this statement.

UPMOST reserves the right to amend this statement. When UPMOST makes changes to the collection, processing, or use of personal data, the content of this webpage will be updated, and relevant changes will be notified to users via the email provided. If no objection is raised, it will be considered as your agreement to this statement.
If you have any questions regarding this statement, please email service@upmost.com.tw, and UPMOST will respond as soon as possible.

Intellectual Property Rights Disclaimer of the Website

All copyrights, patents, trademarks, and other intellectual property rights in the works, data, content, programs, and website design arrangements on the UPMOST website are owned by UPMOST or its authorized legitimate rights holders, and are intended for personal and non-commercial browsing only. Any information, software, products, or services obtained from this website may not be modified, copied, distributed, transmitted, displayed, performed, reproduced, published, licensed, created into derivative works, edited, disseminated, transmitted, or used for any other purposes, including rental, sale, or other purposes. Any violation will result in the user assuming all legal responsibilities, and UPMOST reserves the right to seek compensation in accordance with the law. If any attempt is made to disrupt or interfere with the data and functions on the UPMOST website, or to invade or damage any network systems, UPMOST will take legal action accordingly.

Newsletter Subscription Terms

1. UPMOST provides newsletter information, and by subscribing to the newsletter, it will obtain your email address, which may directly or indirectly identify your personal information.
2. The company will collect, process, and use your personal data in accordance with the Personal Data Protection Act and relevant laws, based on the company's privacy protection policy.
3. The company will update the privacy protection policy in accordance with legal requirements and business operations needs. These updates will not be separately notified. Such updates will not affect your rights as outlined under the Personal Data Protection Act.
4. You agree that UPMOST may use the personal information you provide to verify your identity, contact you, provide UPMOST-related services and information, and use your data in accordance with other practices outlined in the privacy protection policy.
5. You may, in accordance with the Personal Data Protection Act, request UPMOST to:
(1) Request to inquire or view your data.
(2) Request to obtain a copy of the data.
(3) Request to supplement or correct the data.
(4) Request to stop the collection, processing, and use of data.
(5) Request deletion.
However, if exercising the above rights results in a reduction of your benefits from UPMOST's electronic newsletter services, UPMOST will not be liable for compensation. Additionally, in accordance with Article 14 of the Personal Data Protection Act, the company may charge administrative fees.
6. If the personal data you provided is reported and the company finds it insufficient to verify your identity, or if there are cases of identity theft, misuse, or incorrect data, or if requested by the competent authorities or email server management entities/institutions, the company reserves the right to temporarily suspend the delivery service to your associated email account.
7. The duration of UPMOST's use of your personal data: From the time you apply for newsletter subscription, until two years after the cessation of this service. The company may not provide further notice when this service is discontinued.
8. You acknowledge that this consent form complies with the requirements of the Personal Data Protection Act and relevant regulations, and you agree that the company may retain this consent form. The use of email responses will be regarded as a written reply, and the company will act according to your expressed intention to either provide or stop UPMOST's newsletter-related services.
9. The intellectual property rights, copyrights, and other rights related to the content of the UPMOST newsletter are protected by applicable laws and regulations.
10. You have the right to request the use, correction, supplementation, deletion, or blocking of your personal data, or to object to the use of your personal data for direct marketing or to receive specific or various marketing materials. Please send any such requests to: service@upmost.com.tw or call: 02-2883-7222, extension Customer Service Department.

goldennet

Product Specifications

Product Application

BIOS screen to configure array mode

System Requirements

Product List