goldennet

Using AV over IP to plan audiovisual presentations, integrating four devices to provide the following eight major functions: screen preview, distance extension, matrix switching, screen stitching, screen splitting, keyboard and mouse control, venue management, and environmental control support. This setup solution offers high scalability, capable of meeting various application scenarios based on different venues and requirements.

Supports up to 4096x2160 @60Hz RGB resolution. Compared to 1920x1080 @60Hz resolution, it delivers finer details, offering an excellent visual experience for multi-screen video wall displays.

By using network cables to connect the encoder (TX) to the network switch, and then to the decoder (RX), a transmission distance of up to 200 meters can be achieved.

Through the screen stitching feature, you can combine a set of signal images across multiple screens like a puzzle, enlarging the display onto a video wall for a comprehensive big-screen experience.

It allows multiple signal sources to be displayed simultaneously on one screen, supporting formats like PIP (Picture-in-Picture), PoP (Picture-out-Picture), PBP (Picture-by-Picture), and Quad. This feature facilitates easier monitoring and management, enhancing operational efficiency.

It allows transmitting the screens of multiple computers to different locations and remotely controlling them using a keyboard and mouse, without the need to operate directly on the computers, enhancing convenience and flexibility.

In the same local area network, users can connect to the device's management webpage (WebGUI) using a computer, smartphone, or tablet for configuration, eliminating the need for on-site operations and making maintenance and management more convenient.

Through PoE (Power over Ethernet) technology, there is no need for a power adapter. When there is no power outlet in the installation environment, simply connect the RJ45 network cable to the network switch, and it will supply power to the device while transmitting the signal simultaneously.

• The 4K@60 1Gbps AV over IP transmitter supports unicast or multicast mode.
• IP interface: RJ45.
• Supports KVM over IP (can connect USB flash drive, keyboard, and mouse).
• Supports PoE-PD (IEEE 802.3af).
• Supports conversion from IP to IR / RS-232, allowing IP signals to be converted into IR and RS-232 commands to control devices.
• Controlled via WebGUI, IP master controller, and Telnet.
• 1×HDMI input, 1×HDMI loop output.
• Supports using an external control center (IP master controller) for expanded functionality.
• Supports independent, separated A/V and control matrix routing.
• Supports extension of various audio formats, including 8-channel LPCM and standard bitstream.
• The analog Line In is automatically embedded in the streaming output and can be independently routed to any receiver.

• The 4K@60 1Gbps AV over IP transmitter supports unicast or multicast mode.
• IP Interface: RJ45.
• Supports KVM over IP (can connect USB flash drives, keyboards, and mice).
• Supports PoE-PD (IEEE 802.3af).
• Supports IP to IR / RS-232 conversion, allowing IP signals to be converted into IR and RS-232 commands to control devices.
• Controlled via WebGUI, IP master controller, and Telnet.
• Supports the use of an external control center or control software to provide extended functionality.
• Supports independent separation of A/V and control matrix routing.
• Supports extension of multiple audio formats, including 8-channel LPCM and standard bitstream.
  Note: The analog Line Out only supports LPCM 2.0 source.
• The analog Line In is automatically embedded in the streaming output and can be independently routed to any receiver.
• The Mic In will transmit the audio directly to the analog Line Out of the transmitter currently routed.
  Note: This is only available when connected to the Line In of the transmitter itself.

• Encoder ×1
• 3.5mm IR Extension Cable ×1
• 3.5mm IR Transmitter Cable ×1
• Power Adapter (DC 12V/1.25A) ×1
• Original User Manual (QSC) ×1